MOULDCHECK STERILIZER 2 Concentrate 5 LITRE SINGLE 1 X 5 LITRE Makes 25 Litres of end product

Why use Mouldcheck Sterilizer2? Mould growth must not be disturbed prior to treatment. If heavy growths are dry brushed, scraped or rubbed they will release large amounts of spores (seeds) into the atmosphere which can induce allergic symptoms such as Rhinitis, Asthma and Alveolitis. Therefore it is essential to sterilize all the growths before work commences.

Description: Mouldcheck Sterilizer2 is a water based biocidal detergent, formulated to kill and clean mould infected areas leaving them sterile.

Step 1. Using Mouldcheck Sterilizer2

Dilution: 1 part Mouldcheck Sterilizer2 to 4 parts water.

Application: Apply Mouldcheck Sterilizer2 with a sponge, brush or soft cloth. (Do not spray). Wash away all visible signs of mould growth, extend treatment 1 metre in all directions.

Coverage: As required to remove growths. Do not exceed 10 square metres per litre.

Drying time. Normal drying time is 1-2 hours, this may vary depending on environmental conditions. Ensure good ventilation at all times.

Equipment care and cleaning: Clean all equipment with water immediately after use.

Limitations: This product should only be applied when environmental conditions are conducive to decorating standards.

Packaging: 5 Litre

FOR PROFESSIONAL USE ONLY.

Uses: On all hard internal surfaces (walls, floors, ceilings, tiles, window frames etc) prior to preparation.

MATERIAL SAFETY DATA SHEET

MOULDCHECK STERILIZER 2. Concentrate (5 LITRE) SINGLE 1 X 5 LITRE Makes 25 Litres of end product.