The Biocure range offers a quality vinyl matt and vinyl silk water-borne emulsion. Providing excellent obliteration on interior surfaces, drying to a hard microporous finish which contains fungicides for the purpose of protecting the final decorative finish from further attack from mould. Biocure internal coatings are all formulated to provide a premium quality decorative finish that has low toxicity and broad spectrum high activity. They perform under the harshest conditions where other decorative coatings would normally fail.
Product Name: Biocure Vinyl Matt and Silk
Coating Type: Vinyl Emulsion.
Typical Use: Biocure Emulsion contains a special fungicide which inhibits the growth of fungi and mould inside buildings. Its broad spectrum of antifungal activity makes it ideal for most interior walls and ceilings likely to be disfigured by mould.
Before preparing any surface for painting, Wear a suitable face mask if dry sanding. This product contains no added lead. However, the wood and metal surfaces of the building, especially if it is pre-1960, may have been decorated in the past with a paint made with lead pigments. Preparation and removal of such paint can be hazardous.
Pack Size: 5 Litre
Colours Available: White and Magnolia
Drying Time At 20oC: Touch Dry: 1 hour.
(Will Vary With Temperature, Firm Dry: 2-4 hours. Air Movement etc.). Overcoat: 2-4 hours.
Note: Drying times of emulsion paints will vary widely depending upon humidity, air circulation, ventilation, etc.
Shelf Life: 2 years or longer in unopened containers, when stored under cover in
good storage conditions.
Storage: Under cover within temperature range of 5oC to 32oC.
Protect from frost.
Health and Safety: Please see relevant MSDS sheet.
MATERIAL SAFETY DATA SHEET